Lawn sprinklers and garden irrigation in Richmond Hill
Richmond Hill sits on the Oak Ridges Moraine, and that single fact changes how irrigation has to be designed here. Soil drains faster on the moraine than on the clay flats to the south, grades are steeper, and gardens are often extensive. Pro Green Irrigation installs and services lawn sprinkler and garden irrigation systems across Richmond Hill, from Mill Pond to Oak Ridges to Bayview Hill.
What does a lawn sprinkler system cost in Richmond Hill?
A typical subdivision lot with a 40 to 60 foot frontage and 100 to 150 foot depth is generally in the range of $3,900 to $4,900 in Richmond Hill. That figure moves with the property — the landscaping, garden detail, water supply and actual layout all change the design. For larger properties a site visit is needed to price accurately, and we give you a written quote after walking the property with you rather than a number over the phone.
Why do properties in Richmond Hill need a custom design?
Richmond Hill properties trend larger than the GTA average, particularly through Bayview Hill, South Richvale and Oak Ridges, where deep lots with substantial garden beds are the norm rather than the exception. Garden irrigation is often as important as lawn coverage here — which is why we look at the beds as part of the design rather than treating them as an afterthought.
We work throughout Richmond Hill — the established streets around Mill Pond, the larger properties of Bayview Hill and South Richvale, and north through Jefferson and Oak Ridges.
What is the water supply and pressure like in Richmond Hill?
York Region supply serves Richmond Hill with generally good pressure. On the larger lots, flow rate rather than pressure limits how many heads can run at once, so zone counts are higher than homeowners expect.
How often should you water a lawn in Richmond Hill?
The Oak Ridges Moraine brings sandier, faster-draining soil through the north of the city, while southern Richmond Hill is closer to the clay typical of the region. Fast-draining soil needs more frequent, shorter watering — the same schedule that works on clay will simply drain past the root zone here. We set schedules to the soil we actually find on the property.
How is a sprinkler system installed?
Richmond Hill gardens are typically extensive, so a well-designed system here usually carries more zones than a comparable property elsewhere. Slopes get cycle-and-soak scheduling so water soaks in rather than running to the bottom of the grade.
- Trenchless installation. Pipe is pulled beneath the turf rather than dug in, so an established lawn is walkable the same day.
- Contractor-grade components. Hunter and Rain Bird heads, valves and controllers — the same parts we have to come back and service.
- Zoned to the property. Lawn, gardens, sun and shade are separated so each area gets the water it actually needs.
- Designed on site. We test how many heads each zone can run before anything is installed, then flag out the layout with you.
- Our own crews. We never sub-contract — the people on your property are on our payroll.
- Five-year parts and labour warranty* on every system we install.
Do you install landscape lighting in Richmond Hill?
Larger Richmond Hill properties with deep front gardens take landscape lighting well — uplighting on specimen trees and stonework, path lighting along longer walkways and driveways. Vista and other contractor-grade fixtures, installed by our own crews.
When should a system be started up and winterized?
Spring start-ups from April; fall blow-outs from late September. Larger systems with high zone counts take longer, so book winterization early.
A spring start-up means charging the system, checking every head, adjusting spray patterns and programming the controller for the season. A fall blow-out means clearing the water out of the lines with compressed air so nothing freezes and splits over winter. In this climate winterization is not optional — water left in a line will crack the pipe or the fittings.
Which areas do you cover from Richmond Hill?
Our Richmond Hill crews work across Oak Ridges, Mill Pond, Bayview Hill, South Richvale, Jefferson, Devonsleigh, Rouge Woods and Observatory.
- Oak Ridges
- Mill Pond
- Bayview Hill
- South Richvale
- Jefferson
- Devonsleigh
- Rouge Woods
- Observatory
Richmond Hill irrigation questions
The questions homeowners in Richmond Hill ask us most often before booking a quote.
How much is a sprinkler system in Richmond Hill?
A standard subdivision lot is generally $3,900 to $4,900. Richmond Hill properties are often larger than average, and extensive garden beds add zones, so many quotes here land above that range. We give a firm written price after seeing the property.
Can you irrigate garden beds as well as lawn?
A system from Pro Green can be designed to water both gardens and grass. So where it makes sense we can try to design a system that can water both. Ask us about options for your property.
Does the Oak Ridges Moraine soil change the design?
It does. Sandier moraine soil drains faster than the clay found further south, so watering has to be more frequent and shorter or it drains straight past the roots. We set run times to the soil on your property rather than a regional default.
Do you work in Oak Ridges and Bayview Hill?
Yes. Oak Ridges, Bayview Hill, Mill Pond, South Richvale, Jefferson and the surrounding neighbourhoods are all regular service areas for our crews.
How do you handle sloped properties?
With cycle-and-soak scheduling — several shorter cycles with soak time between them instead of one long run. On a grade, a single long cycle mostly produces runoff at the bottom and dry turf at the top.
What warranty comes with the system?
Every system we install is backed by our five-year parts and labour warranty*, and we never sub-contract the work — the crew on your property is on our payroll.
Other areas we serve
Not sure whether we cover your street? Call (416) 917-0909 — we will tell you straight away.