17 Dec 2018

The Precautions To Be Taken During Landscape Sprinkler System Usage

Following is an enumeration that lists some of the major precautions that you would have to be aware of while you are installing or using your landscape sprinkler system on your residential premises.

 

The Measurement of Water

Make sure that while measuring the flow of the water, you are not using a bucket of gauge as a unit of measurement. The GPM value for your sprinkler system should be calculated on the basis of the size of the current water supply pipe that provides to your house. In some cases, you might be advised to measure the water by letting an existing faucet on and remarking on how much time it takes to fill a standard bucket. This is usually a do-it-yourself method. In other cases, you might also be advised to make use of a special gauge that would help you to measure the flow. All these methods can be applied for measurements.

 

Other Measurements

Nevertheless, however so you might decide to measure, you have to take into account that merely making a note of the flow from a faucet would not be an appropriate calculation, given that there are other variables that contribute to the whole process. In light of this fact, a possibility would be that there will be a situation where the irrigation system in your house is set at a higher level than what is permitted by your house’s plumbing system. This could result in serious damage and unnecessary repair costs on your part.

 

The Pipe Size

When you notice that when a faucet is turned on, and that the flow of the water is much higher than anticipated or seems to be exerting a great deal of pressure on your pipes, you would have to consult expert landscape sprinkler services to correct the issue. Keep in mind that running the water in this manner for a few minutes or even an hour or so it might not ostensibly cause substantial damage to your pipes, however, the pressure exerted over a prolonged period of time might accumulate to wreak havoc on the surface of your pipes, which are commonly named as ‘water hammer’ and ‘scrubbing’ damages. This would entail exorbitant repair and renovation costs and could even necessitate re-piping the entire plumbing system of your house. Therefore, make sure that you are conscientious of the pipe size and how it is proportional to the water supply volume.

 

The Overlap Of The Sprinklers

The factor that you would have to take into account is that your sprinklers must have an almost 100% overlap. There might be some instruction leaflets or manuals that will portrait coverage asks that do not go all the way from one sprinkler to the next. In this case, you must be aware that this methodology is a traditional one that is no longer in recommended use. Previously comma when there were no low floor sprinklers to help preserve water, this methodology was utilized throughout. However, now with the advent of new technological equipment and components, we have also found better processes of doing things. Today, most of the experts in this domain unanimously agree on the necessity of a near hundred percent overlap of sprinklers. If in case there isn’t a hundred percent overlap of the sprinklers, you might risk over watering your lawn in order to provide more water supply to the drier spots. This could engender a breeding ground for a spectrum of landscape diseases.

 

If you happen to be in need of available memory comes to consultancy services or products relating to landscape sprinkler systems or irrigation systems in Toronto, you can solicit the services of Pro Green Irrigation.

 

17 Dec 2018

Essential Tips For Lawn Irrigations And Installing Sprinklers

If you are planning for an imminent project of installing a sprinkler system on your residential premises for the purpose of irrigating your lawns, the following guidelines will serve as the parameters that you would have to keep in mind while rendering the services of a professional contractor.

 

Planning The Sprinkler Design

Make sure that you establish a line of contact with your landscape contractor before you commence the installation of your sprinkler system on your residential premises. This would fulfill the purpose of putting in place a layout plan for the system that will be installed. Your landscape contractor must visit the site of installation to examine the surroundings and draw the necessary conclusions and details that need to be noted for the project at hand. Some of these would be inclusive of taking the pressure, noting the flow readings, verifying the type of soil, the slope, and other associated conditions. These details would prove to be crucial in the planning of a successful sprinkler system.

The Regulations

For installing a sprinkler system on residential premises, your landscape contractor might have to communicate with the city officials to inquire about the water regulations. There are many cities which have certain rules and restrictions that are expected to be followed by the residents. Some of the common rules could be watering only on even or odd days, for instance, and the like. Your contractor must have the experience and professionalism to take care of clearing all these doubts before you start the installation of your sprinkler systems.

Written Estimates

Be certain to settle down upon a final deal with a landscape contractor who is willing to provide you with a written irrigation plan for your sprinkler system installation. This would be emblematic of a full coverage over the said landscape. The irrigation plan is oftentimes created in correspondence with the overall landscape plan. Additionally, written estimates and details would mean that you, as a client, will be aware of all the prerequisite details that make up for the scheme of the plan.

Precautionary Measures

One of the foremost precautionary measures that you would have to take into account is to avoid overspraying at all costs. When your sprinkler system has a tendency to spray pass the demarcations of the lawn into your patios, driveways, or pathways, there is a considerable amount of water wastage. Overspraying can also lead to a potential safety hazard because it can facilitate the surface of your driveways to become more slippery and thereby more prone to cause accidents. To avoid overspraying your lawn, you would have to design an easy coverage of the space for the sprinklers. It is estimated that lawns that are squares and rectangles are comparatively easy to irrigate without risk in the factor of overspraying. Keep this in mind when you are having a discussion with your professional landscape contractor during the installation and the planning process.

Underground Irrigation
One of the most efficient solutions to counter the problem of overspraying is to install an underground drip system. If you have a lawn that curves in the perimeters or is not a perfect square or rectangle shaped space, and an underground drip system would help you to install the sprinklers without risking overspraying.
Nevertheless, organic curves in lawns might be a little more challenging to handle. This is because sprinkler heads generally spray in a fixed pattern, which could be a quarter circle, a semi-circle, or a full circle. Broader curves have the advantage of being irrigated without risking overspray, while, on the other hand, if the lawns are in a zigzag or an extremely jagged pattern, they might not be irrigated quite as efficiently.

If you are in search of a reliable name in the industry of irrigation and landscape sprinkler systems, you can depend on the name of Pro Green Irrigation.

 

12 Nov 2018

How to Choose the Best Garden Watering Systems

A proper irrigation system is vital to help your plants flourish, as well as, to save water. However, hand-watering gardens, flower beds, and lawns can be a hassle and a time-consuming task.

Maintaining your garden can be more tiresome if you have a busy schedule because dragging hoses, moving sprinklers around, and watering each plant takes time. To avoid such hassles, it is best to incorporate the latest irrigation system for your landscape to make your life easier. Moreover, if you’re also concerned about the efficient use of water, it makes sense to incorporate water-saving strategies into your landscape plan.

The new innovative watering systems make it easy to give plants the consistent moisture they need, in addition to saving water. These efficient garden watering systems ensures your peace of mind in all seasons, without the need for hoses or sprinklers to move around. Moreover, some customizable systems allow you to add a timer so that your garden will water itself.

The watering methods which work well for a landscape somewhat depend on planting arrangement and crop type. Depending on your needs, you can choose the best irrigation system for your gardens.

Soaker Hoses and Drip Irrigation Systems

One of the best irrigation systems is the Drip Soaker Hose System which works especially well for closely spaced crops and intensively planted beds. This system makes use of a soaker hose to provide slow and deep watering to the plants. It is perfect for watering foundation plantings and multiple garden beds.

Drip irrigation systems apply water at the root zone and distribute water at regular intervals through a network of hoses or tapes with slits, pores, emitters or drippers. This type of irrigation is typically used for farms and commercial greenhouses, but now the professional drip irrigation is used for residential gardens as well. This system is a great option to conserve water because as compared to overhead watering, soaker hoses consumes around 80% less water. You can easily set up a watering system by alternating sections of soaker hose and a garden hose.

Thus, unlike surface and sprinkler irrigation, drip irrigation slowly drips water to the roots of plants, so that only part of the soil in which the roots grow is wetted. This is best suited for rows of crops spaced at varying intervals and for properly leveled ground.

In-Ground Sprinkler Systems

Creating a flawless and splendid garden takes lots of time and efforts. If you want to maintain your lawn all the year round without putting much effort, think about installing a proper sprinkler system to save your time, as well as, money.

To water larger areas, like ground covers and perennial plantings, an in-ground irrigation system is the best option which ensures that the right kind of head delivers the appropriate amount of water. However, it is important here to plan your landscape project properly by organizing plants according to low, moderate and high water use. This is done to make sure that the spray heads are installed in a zone with plants of similar watering needs.

You can have a customizable system with sturdy sprinklers. The system will include built-in ground spikes. The 180° sprinklers are used to water half-circles, while 360° sprinklers are designed to water full circles. Since the watering needs are different for perennials and shrub beds, it is necessary to have separate grids for them. Moreover, you can add a timer, so that it will do the job even when you’re not around.

The best feature of this system is the rain sensor which automatically turns off sprinklers when it rains or adjusts the settings according to the weather. Although a drip irrigation system is recommended for perennials and shrubs, sprinklers are more suited for flower beds and lawns.

So, now having a breathtaking garden is no more a dream. All you need to do is to install an efficient Sprinkler or Drip Irrigation System to save your time, efforts, and money.

05 Nov 2018

Tips for Planning an Efficient Drip Irrigation System

If you’re looking to improve your landscape irrigation system, drip irrigation is the best option. The system of drip irrigation is becoming more and more popular worldwide because of its various advantages.

The biggest advantage of installing drip irrigation systems is its ability to efficiently deliver the exact amount of water required by your plants. Thus, it ensures water conservation and results in reduced water bills. The drip irrigation system distributes water slowly and at a regular interval which helps in increasing the crop production, in addition to saving more water as compared to a sprinkler. A drip irrigation system when installed in conjunction with a water timer, automatically feeds your plants daily.

Planning and installing drip irrigation systems requires some knowledge in this field. If you’re planning to install a drip irrigation system of your own, you need to determine the rate of flow of your drip emitters, the types of plants you are watering and the condition of the soil. You will need to do some homework to successfully implement drip irrigation systems that use water responsibly while allowing landscapes to flourish.

You need to follow the step by step process to create an efficient low-volume irrigation system. Here we have listed five considerations for planning a drip irrigation system.

  • Consider the topography, size of the area, and the water flow rate to determine the size of the pipes required. If the area is non-grassy, densely planted with homogeneous plants, it is best to provide it uniform and consistent root watering. Moreover, to find out the right size of the system and water flow, you will need to figure out the elevation of the area you’re going to irrigate. This is because any change in elevation results in a change in the pressure and you may need pressure compensation within the system on steep slopes.
  • The water source for your irrigation is one of the important considerations. Before installing your drip irrigation system think about the quality of your water source because you might need to adjust the water pH level, depending on your crops. For instance, if you’re going to use pond water source, it will require the installation of a filtering system.
  • Watering needs of plants depend on several factors, such as species, climate and planting density. Also, plants have different watering needs than grass, so your irrigation system should allow different settings for drip and sprinkler points. Find out the amount of water needed by each type of plant within the irrigation site to determine the most effective irrigation methods. This will also help you in deciding the types of emitters required for different groups of plantings.
  • You will need to calculate system runtime which is dictated by the irrigation needs of the base plant. Base plants require the least water and irrigating this plant determines how long it takes to provide adequate hydration. So, the flow rates to other plants must be adjusted for adequate hydration during that same amount of time. This will help in determining the irrigation interval that how often you’ll run your system.
  • Above all, make sure when planning a drip irrigation system to draw a sketch of your project area by locating your water source and other important points. This basic sketch will help you better visualize your project and in avoiding mistakes.

Thus, the landscape and drip irrigation designers consider various factors, that is, size of a planted area, plant’s root depth, soil type, water requirement and density of planting for designing an efficient drip irrigation system. The process of designing may seem complicated but the outcome surpasses all the efforts.

 

10 Oct 2018

Essential Outdoor Lighting Tips

Lights and their strategic positioning have the competence of completely transforming the exterior look of your house. Landscape lights can be both functional and installed to enhance and adorn the decoration of your house. On the one hand, they light up your entire property, thereby keeping you safe from the prowling of trespassers and delinquents, and, on the other hand, they can be the perfect accessory to brighten up the appearance of the house.

Despite the countless options of landscape lights in the market today, you must make sure that you settle down on an option that is congruent to your liking and the overall décor of your house. The choice of landscape lighting is also determined by the manner in which you want to capitalize on the available space in your grounds. Depending on this, you would have to conclude whether you would be in need of illumination along the pathways or driveways, or if you would prefer using landscape lights to highlight a centrepiece in your patio section. If you have a separate area for sports, you might have to choose a different set of lighting fixtures meant exclusively for this purpose.

Enumerated below are a few essential tips that would be of help in guiding you through the process of choosing a particular variety of landscape lighting fixture.

Night lighting in tropical garden Decorative LED lighting in garden to see the garden pathway at night with palm trees.

 

The Layout

Before you proceed with the purchase of landscape lights, make sure that you draw out a plan of what you would like to realize at the end of your project. The landscape lighting on your property is directly dependant on the efficaciousness of the layout that you make after careful inspection of the premises.

While charting a blueprint, be certain to be inclusive of how the exterior lighting looks from inside the house too. This would help you to ensure that the design is synchronized with the all-round look of the house.
Additionally, mark a few focal points on the layout that would be the locus of your exterior landscape. These areas would require special attention while settling down on the lights and it would be wise to choose lights that would highlight them and not overshadow them. Determining the focal point would also aid you in playing around with shadow effects to create more depth and dimension on the premises. Further, be conscious of the difference between ambient and spotlighting. The former is more mellow in tones and brightness and casts a veil of light over an extended area, while the latter refers to the use of strong lighting fixtures to focus attention on one particular part of the landscape.

Lighting Strategies

The three most popular choices of lighting strategies would comprise downlighting, uplighting, and cross lighting. Downlighting is the manipulation of lights in a manner that dissipates the light by pointing it downward. It aims at a softer, more affable glow dispersed over an area. Uplighting would be characteristic of dramatic and bolder lighting that creates strong accents highlighting the best features of the landscape and exploring the shadow effect on greater depth. The lights are pointed upwards, illuminating only a desired part of the property.
Crosslighting is the strategy of cancelling out shadows by using both the upward and downward focal lighting.

 

Other Factors

While choosing the light fixtures for your house, make sure that you are selecting more fixtures with comparatively lower lumen outputs. If you use a lesser number of fixtures, but higher light intensity, it ends up defeating the purpose of landscape lighting. This would create extremely illuminated centres in some areas and leave the great in the dark. This looks unsightly and is not conducive to the safety of your house as well.

 

If you have decided to install landscape lighting in your house, you could consider soliciting the services of Pro Green Irrigation Services to help you navigate through this plan to realize the lighting of your liking.

 

01 Oct 2018

Important Tips For Planning A Drip Irrigation System

Micro-irrigation has quickly become a popular mode of irrigation, given the fact that it is economical and far more efficacious than traditional methodologies that entail classic irrigation techniques. Usually, micro-irrigation, or drip irrigation, is a channel of plastic tubes that are equipped with low volume drippers and sprinklers that are designed to spread throughout your garden and distribute water evenly. This mode of irrigation happens to be a fraction of the price of conventional irrigation methods and boasts of ease of installation. The plants in your garden can be watered with just the turning on of the water and letting it flow for about an hour or so. Some systems even have a battery-operated controller switch that enables you to take advantage of a watering system that is completely automatic.

 

General Advantages

Apart from being cost-effective, drip irrigations aid in the management of time and energy as well. While using this system, the water used for this purpose is distributed more uniformly and with minimal wastage. You would also have the ability to regulate the flow and amount of water that would have to be distributed through your garden. This also helps the roots of the plants to absorb the maximum amount of water and evade the overflowing of water on the soil surface. In turn, drip irrigation conserves water by circumventing runoff and evaporation of water.

 

Plan A Sketch

If this is the first time you are implementing drip irrigation in your garden, it is advised that you start with a smaller area first to learn the basics of the technique and then expand into the entirety of the garden. You could choose a portion of the land and install a simple one-zone system first. The purpose of testing this method out is to deduce the most resourceful watering device for the requirements of the types of plants you have in your garden. This would be a crucial determinant of the rate of water flow that would be supplying to the entire field. Have this trial method set up for a few weeks and maintain the watering at regular timings so that you can arrive at an approximate estimate.
To construct a sketch, you would have to know the measurements of your land. The initial drip-rate would be decided by the type of plants that would be supplied by the system. While setting the system up, make sure that you reach the roots of all the plants in the designated area. Additionally, do not worry if the system does not look perfect at the very first try. A few adjustments here and there would be beneficial for you to understand your garden’s needs and you would ultimately be able to come up with the most efficient model for the drip irrigation.

 

Plan for the Future

While setting up your drip irrigation system, you must be accommodating of the future of your plants’ growth. With passing time, they will be requiring a higher amount of water. Consequently, you would have to build a system that would capacitate such an amount in the future. Sometimes, your pressure tank would have to be upsized to slow down the pace of pump cycling.

 

Installations of drip irrigation systems are best done through the assistance of a team of professionals. If you are planning to set up such a system in your garden, you could consider rendering the services of Pro Green Irrigation to cater to all your requirements in this area.

08 Sep 2018

The 3 Types of Irrigation Systems for Your Lawn and Garden

Waking up to a beautiful garden in your backyard is a lovely feeling. No matter how tired you are but seeing some colorful flowers and a fruit popping out from the blocks of green leaves is a sight that can energize you in no time. And if you take it to the other side, a dull and dry garden with withering plants can be an eyesore.

So which one do you like better? If you say yes to the first one then get ready, it is time to have a look at some irrigation systems for your lawn and garden. The key to a healthy and lush green garden is proper irrigation and maintenance. Without it, every morning you will be treated to a cemetery of plants.

But with so many options in the market, how do you decide on the best one for your lawns or gardens? Add to that the number of features each system provides, the research can get a little tiring. Some are manual, some are automatic, some save water but require regular maintenance, or how about one that wastes a lot of water but requires almost no maintenance at all?

Where do you find the balance?

Here are some important tips that will make it easier for you to decide on the best irrigation system for your lawn and gardens –

Manual Watering

This is one of the simplest, easy to use and cheapest irrigation systems that you can opt for. It’s the old-fashion water cans and hoses. Completely manual but very effective in the right hands. You don’t have to install anything, all you need is a tap or a water source and you are ready to go. If you have a small garden or a small patch of lawn then this type of irrigation is more than capable of handling the task.

They are best used with container plants and flowers. The main con with manual watering is to know when to stop. This can lead to overwatering and water wastage. So as long as you have a small area to cover and can manually monitor the irrigation, manual methods can work without any problems.

Sprinkler Systems

Sprinkler systems are commonly used in lawns and large gardens. The working principle is simple here – there is a pressurized supply and a spray heads are attached to the end. A stream of sprayed water covers a large portion of the land quickly. This is the simpler part, it gets complex when you have a look at the number of options and styles of lawn sprinkler systems.

Oscillating, stationary, impact sprinklers, automated ones, traveling sprinklers are just some of the types of the sprinklers that are available in the market. Sprinklers are best paired with flat and large patches of low-level lawns and gardens. If not monitored regularly, they can waste a lot of water.

Built-in Irrigation System

If you have a big lawn and want the absolute best for it then have a look at permanent systems. These are expensive, require regular maintenance but the results speak for themselves. Trenches are dug and in-ground pipes are laid which are connected to an automated water source and detection systems. All of the monitoring, time controls and water flow can be programmed. It is almost an auto-pilot system.

Some of the advanced ones can also take the weather info into account and create a specific watering schedule accordingly. It saves a lot of time and also takes out the guessing factor. If you have the resources to put one into place then you cannot go wrong with it.

Professional Installation

No matter what system you choose, it is always best to contact a professional to install it. A bad installation will cost a lot of water and time wastage. So save yourself from the hassles or irrigation system installations and contact Pro Green Irrigation today.

06 Sep 2018

5 Simple Lawn Watering Tips for the Freshest Lawns

A perfectly maintained lawn adds tremendous value to a property. And not just the real estate value, people are also impressed with a flat lush green lawn which looks fresh all around the year. Apart from being environment-friendly surface to carry out activities, a natural lawn also provides many health benefits. But what does it take to keep a lawn healthy?

Many things. And one important element is regular watering. If you want a lawn that is healthy then you should start focusing on watering it properly. Without regular supply of clean water at right intervals, it won’t take it long for all the green to fade away.

But what is the right time and techniques to water the lawns? Are some hoses okay? Sprinklers systems are the best, right? These are just some of the questions that pop up when you think about watering the lawns. Watering lawns is a science and we here to help you with it.

Here are 5 simple tips that you should know about watering your lawn like a pro –

The Best Time To Water

If your lawn appears dull and dry, it’s a simple sign that it needs water. One easy way to ensure that your lawn is in good condition is to walk on it. If your footprints stay there for long then it means it is running dry. But you should not run away and turn on the sprinkler systems just yet. There are certain time-periods when watering the lawns give you the best results.

The morning and evening time slot is best for watering. During the morning (before 10am) and the evening (4pm-6pm) evaporation rate is lower. It gives the water enough time to seep into the soil.

The Water Amount

The water should soak 6-8 inches deep into the ground. You can check this by digging a screwdriver deeper into the ground. You can also use a shovel and lift up the sod. Record the time it takes for the water to reach that exact level and water the lawn for that duration every time you repeat watering. Every lawn is different so make sure you experiment with the depth and time.

Pulsating Sprinklers are Better

You will come across many types of lawn sprinkler systems in the market. One of them is the pulsating sprinkler which is one of the better lawn sprinklers. If you don’t have the luxury of getting an in-built and automatic sprinkler, you can get one and these and hook it up to a garden hose. It sprays the water horizontally, making it less susceptible to losses due to evaporation.

Too Much Water is Bad

People often make the mistake of over-watering the lawns. They would water them over 15-20 minutes daily which is a complete no go. If you want to have it like the pros, then don’t go for lawn watering more than 2 days a week. Lawns are tough, they can stay fresh up to 2-3 weeks without water. Over watering can lead to problems of fungal growth and weak root systems. Both of which are not good for a growing lawn.

You Should Get a Timer

If your mind wanders a lot and often forgets about shutting off the tap then you should get a timer. These cheap but highly effective gadgets will shut off the water supply after the set time period. This way, you don’t have to worry about flooding your garden when you binge watching that new season of the show you like.

P.S. – Get in touch with an irrigation specialist like us to get the best out of your lawn.

12 Jun 2017

How to begin planning your sprinkler irrigation system

We like to begin with a conversation and a pen and paper.  The best way to plan out a sprinkler irrigation system for any lawn or garden is to start with the basic layout and note any obstacles or features that will have to be taken into consideration when planning out the placement of each individual sprinkler.

Measure your garden

The team of qualified sprinkler irrigation system installation experts will begin the process by taking accurate measurements of your yard. Once this is made they can begin to accurately plot where they recommend each sprinkler system to go before they even consider breaking ground.

Check the water pressure

This is a vitally important step in making sure that the right sprinkler irrigation system is used and that each sprinkler will be able to cover the area that it is supposed to.  A team of sprinkler irrigation system installation experts will do this for you as they have a very detailed knowledge of what their sprinkler systems need in terms of water pressure to perform well.

Decide where to put the sprinkler heads

Now that you know the size of the yard and the water pressure you are dealing with, we can then move onto working out the best places for each of the sprinkler heads.  This is a process that is worth taking some time over.  You should do everything that you can to avoid dry spots.  The goal is to have the sprinkler irrigation system provide 100% coverage of your lawn using a minimal amount of sprinkler heads.  It takes experience to be able to plot this out with accuracy, you can be confident in the skills of your qualified sprinkler irrigation system installation specialists to get this done right the first time.  What makes this complicated is they the areas that a sprinkler will cover are circles, whereas most yards are square.

Why is it so important that the sprinkler irrigation system is installed so precisely

The watering of your yard and plants is one of the most important aspects of making them look as best as possible.  The plants and grass will simply not survive without an adequate and regular supply of water.

The heat and dryness of the summer months can be the death of many plants that are not supplied with a regular supply of water.  This is something that can be done manually, however it is time consuming and tedious work.  If you take the time to invest in your garden by installing a sprinkler irrigation system, you will see a much healthier lawn in no time.

By having a team of professionals install the sprinkler irrigation system into your Aurora, Markham, Richmond Hill, Toronto or Vaughan yard you will be sure that it is done correctly and efficiently.  Having an efficient sprinkler irrigation system is very important as you want to keep your hydro bill as low as possible.  To make sure that you are choosing the right team for the job, you should ask about their experience and past successes with lawns that are of a similar type to your own.  It is worth taking the time to find the best sprinkler irrigation system installation team in the Aurora, Markham, Richmond Hill, Toronto and Vaughan.  Your sprinkler irrigation system should be able to last a great many years and the biggest factor in making sure it remains functional is correct installation.

Once your system has been installed you should make sure that you know all that you need to about proper maintenance of your sprinkler irrigation system.  Feel free to ask the installation team all about what you should be doing year round to make sure that your sprinkler irrigation system stays in perfect condition.

24 May 2017

What you should, and should not do to keep your Toronto lawn healthy and well watered

Making sure that you have a professionally installed sprinkler irrigation system in your garden or lawn is very important if you want to keep the grass and plant healthy all year round. You do also need to maintain and operate the sprinkler irrigation system properly if you want the best possible results. Here are some of the most important do’s and don’ts of how to use your sprinkler irrigation system correctly.

Things that you should do:

Install and maintain a sprinkler irrigation system. If you plan to water your garden or lawn with a hose you will waste a great deal of water and time. With the simple installation of the right sprinkler irrigation system for your needs you will be able to get the healthy lawn that you have always wanted.

Use a programmable sprinkler irrigation system. These are great for making sure that you don’t over or under water your lawn. They can be timed so that they will only use the perfect amount of water to keep your garden healthy.

Think carefully about the type of sprinkler irrigation system you need for your Aurora, Markham, Richmond Hill, Toronto or Vaughan home. For example, if you want to irrigate your flowerbeds you will need to look at the spray irrigation method that provides a controlled amount of water directly to the plants.

Make sure that there is a rain shutoff device in your sprinkler irrigation system. This will be able to sense when there is moisture already in the soil so that your sprinkler irrigation system does not water the lawn after or during rain.

Clean out all of the water in the pipes before the first freeze. If you allow the water in the pipes to freeze you will be running the risk of the pipes bursting. This can be costly to repair so it is very important that you take the time to do this.

You should make sure that the water pressure in your Aurora, Markham, Richmond Hill, Toronto or Vaughan sprinkler irrigation system is not set too high. If your sprinkler irrigation system is under too much pressure, you run the risk of damaging it.

Keep an eye on the weather and make adjustments to how often your sprinkler irrigation system is active.

Keep a few spare parts handy, just in case you need to swap out a valve or any other component over time.

Things that you should avoid:

Make sure that your Aurora, Markham, Richmond Hill, Toronto or Vaughan sprinkler irrigation system is only watering the area that you actually need to be watered. You do not want to be watering your driveway or other paved area. This can waste a huge amount of water that will not only cost you money but could also potentially help weeds to grow through gaps in the paving stones.

Make sure that the sprinkler system is never used when it is raining. Not only is that a waste of water and money, you can run the risk of overwatering your lawn or garden. This can cause plants to die, so be very mindful of this.

Keep an eye on where the water drains to. If you notice any heading towards your house or towards drains, then it maybe time to rethink the alignment and layout of your Aurora, Markham, Richmond Hill, Toronto or Vaughan sprinkler system.

There is no need to water your lawn everyday. You should look to keeping the plants watered but not to over water them.

You should not start the sprinkler irrigation system installation process until you know where all of the underground utility pipes are. You should wait until you know where they are before you begin to dig. The last thing that you want to do is damage any of these underground systems. You may also be affecting your neighbours if you do not follow this important step. Having a team to make sure that you do not fall foul of this is a huge advantage and will allow you to sit back and relax as your sprinkler irrigation system is installed.

With these simple tips on installation, maintenance and operation you will be able to grow the plants and lawn that you have always imagined. Sprinkler irrigation systems take a great deal of effort out of keeping a beautiful yard and save you a lot of time in the process. By having a team of qualified professionals install your sprinkler irrigation system you can be certain that the placement of the sprinklers and the materials used will be perfect for the unique needs of your garden.