Following is an enumeration that lists some of the major precautions that you would have to be aware of while you are installing or using your landscape sprinkler system on your residential premises.
The Measurement of Water
Make sure that while measuring the flow of the water, you are not using a bucket of gauge as a unit of measurement. The GPM value for your sprinkler system should be calculated on the basis of the size of the current water supply pipe that provides to your house. In some cases, you might be advised to measure the water by letting an existing faucet on and remarking on how much time it takes to fill a standard bucket. This is usually a do-it-yourself method. In other cases, you might also be advised to make use of a special gauge that would help you to measure the flow. All these methods can be applied for measurements.
Other Measurements
Nevertheless, however so you might decide to measure, you have to take into account that merely making a note of the flow from a faucet would not be an appropriate calculation, given that there are other variables that contribute to the whole process. In light of this fact, a possibility would be that there will be a situation where the irrigation system in your house is set at a higher level than what is permitted by your house’s plumbing system. This could result in serious damage and unnecessary repair costs on your part.
The Pipe Size
When you notice that when a faucet is turned on, and that the flow of the water is much higher than anticipated or seems to be exerting a great deal of pressure on your pipes, you would have to consult expert landscape sprinkler services to correct the issue. Keep in mind that running the water in this manner for a few minutes or even an hour or so it might not ostensibly cause substantial damage to your pipes, however, the pressure exerted over a prolonged period of time might accumulate to wreak havoc on the surface of your pipes, which are commonly named as ‘water hammer’ and ‘scrubbing’ damages. This would entail exorbitant repair and renovation costs and could even necessitate re-piping the entire plumbing system of your house. Therefore, make sure that you are conscientious of the pipe size and how it is proportional to the water supply volume.
The Overlap Of The Sprinklers
The factor that you would have to take into account is that your sprinklers must have an almost 100% overlap. There might be some instruction leaflets or manuals that will portrait coverage asks that do not go all the way from one sprinkler to the next. In this case, you must be aware that this methodology is a traditional one that is no longer in recommended use. Previously comma when there were no low floor sprinklers to help preserve water, this methodology was utilized throughout. However, now with the advent of new technological equipment and components, we have also found better processes of doing things. Today, most of the experts in this domain unanimously agree on the necessity of a near hundred percent overlap of sprinklers. If in case there isn’t a hundred percent overlap of the sprinklers, you might risk over watering your lawn in order to provide more water supply to the drier spots. This could engender a breeding ground for a spectrum of landscape diseases.
If you happen to be in need of available memory comes to consultancy services or products relating to landscape sprinkler systems or irrigation systems in Toronto, you can solicit the services of Pro Green Irrigation.